Prism Navy & Gold Wallpaper Installation Guide:
Preparation: Ensure the wall is clean, smooth, and dry. Repair any imperfections, and remove old wallpaper if necessary.
Tools and Materials: Gather wallpaper adhesive, a smoothing brush, a utility knife, a straight edge, and a tape measure.
Measure and Cut: Measure the wall height and add a few inches for trimming. Cut the wallpaper into manageable strips, allowing for pattern alignment.
Apply Adhesive: Evenly apply wallpaper adhesive to the back of each strip. Let it sit for the recommended soaking time specified by the adhesive manufacturer.
Align and Hang: Start from a reference point (usually a corner or center). Align the first strip with a level and smooth it onto the wall, removing air bubbles with the smoothing brush.
Trim Excess: Use a straight edge and utility knife to trim excess wallpaper at the top and bottom. Repeat this process for each strip, ensuring patterns align seamlessly.
Overlap and Match: When hanging subsequent strips, overlap them slightly at the edges and match the patterns precisely for a continuous look.
Smooth and Remove Air Bubbles: Smooth the wallpaper surface with the brush, working from the center to the edges. Remove any air bubbles by gently pressing them outwards.
Repeat the Process: Continue hanging strips in the desired sequence, taking care to maintain pattern continuity. Trim excess as needed.
Final Touches: After completing the installation, use a sharp utility knife to trim around corners, outlets, and switches. Wipe away excess adhesive with a damp sponge.
Drying Time: Allow the wallpaper to dry completely according to the adhesive manufacturer’s instructions before moving or placing furniture against the wall.
Enjoy Your New Look: Step back and admire the stunning transformation. Your Prism Navy & Gold Wallpaper has added a touch of elegance to your space.
Note: Always follow the specific instructions provided by the wallpaper and adhesive manufacturers for the best results.